Led Floodlight Installation and Precautions

Led Floodlight is a point light source that can illuminate evenly in all directions, its illumination range can be adjusted arbitrarily, and it appears as a regular octahedron in the scene. Floodlight is the most widely used light source in rendering production, and a standard floodlight is used to illuminate the entire scene. Multiple floodlights can be applied to the scene to produce better results. Led Floodlight is the most widely used light source in renderings. Multiple floodlights can be used in the scene to coordinate to produce better effects. It is to illuminate the object uniformly from a specific point in all directions. So what are the installation and precautions of Led Floodlight? Let's take a look at it next.

Here is the content:

l Install

l Precautions

Install

Materials needed for Led Floodlight: LED guardrail light clip, transformer with waterproof function, sub-controller, the steps are as follows:

1. Install guardrails, punch holes on the wall, and the spacing is generally within 3 cm according to actual requirements;

2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding electrostatic clothing, and anti-static measures, because the quality of Led Floodlights of different grades is different, and the anti-static ability is different;

3. Pay attention to the tightness of the installation, the tightness is not good, and the diameter will affect the service life of the Led Floodlight;

4. Led Floodlight wiring should preferably be no more than 25 cm. If the transformer power is large, it can be lengthened accordingly, otherwise, the brightness will be affected.

Precautions

1. Try to use the LED form in series, because the voltage difference of Led Floodlight is special. The peak current of ordinary LEDs is maintained at 80 mA, and the reverse voltage is around 6V. When designing LEDs, it is necessary to pay attention to the peak voltage and current when designing the circuit.

2. Use a voltage below 25 watts when soldering, and the temperature of the soldering iron should be controlled below 300 degrees Celsius. When the SMD LED is exposed at a high temperature, do not squeeze its epoxy resin part, or wipe it with a sharp and hard object, because the LED lamp is very fragile. Yes, it is very easy to damage, and the welding time is less than 3 seconds.

Led Floodlight is widely used, so installation skills and precautions are very important. LED is a new light source. Under the correct installation method, it can ensure the stable and long-term normal operation of Led Floodlight.

Guangzhou Best show Lighting Co., Ltd is a high-tech led lighting factory with 10000 square meters, located in Guangzhou, China; was founded in 2009 and owns 11 years of production experience; it is dedicated to R&D, production, marketing, and customer service. There are more than 25 salesmen, 12 experienced R&D engineers. Our engineers with more than 10 years of LED experience and a reliable sales team provide high-quality technical and sales services. We are continually developing our innovative products to meet the market needs and we have a response after-sale team to offer good service to our customers. The above is about the installation and precautions of Led Floodlight, if you are interested in Led Floodlight, you can contact us. Our website is https: //www.bestshowled.com/. I look forward to your arrival very much and hope to cooperate with you.