 |
Engineered for 24/7 operations with robust heat dissipation and consistent lumen output.
IP65 weather protection keeps dust and moisture out in real-world industrial conditions.
Multiple optics (60°/90°/120°) shape light where you need it and cut waste.
5-year warranty backed by aging tests and high-pot safety checks.
OEM/ODM ready: branding, packaging, and project-specific tuning available.
| Quantity: | |
|---|---|
BS-UFO-2
Bestshow
This UFO LED High Bay is built for the demands of modern warehousing and manufacturing—long hours, airborne dust, and shifting task zones. The die-cast aluminum body pulls heat away from the LEDs like a finned radiator, so output stays steady through a long shift. Under power, the fixture comes alive with a clean, high-contrast white that sharpens edges on racking and pallets. Choose from tight 60° beams that punch down to the floor or wide 120° distribution that washes aisles evenly. The surface feels solid and cool to the touch after operation; no hot-spot surprise when your maintenance crew handles it. The integrated hook mounting makes first installs and retrofits fast—no drama at height. Pair it with optional reflectors to soften glare in people-dense zones such as packing lines or gyms. For operations teams, that translates to fewer shadows, clearer sight lines, and fewer mis-picks.
| Item | Spec |
|---|---|
| Model | BS-UFO-2 (100W / 150W / 200W / 250W) |
| Input Voltage | AC85–265V, 50/60 Hz |
| Power Factor | ≥0.90 |
| Efficacy | ≈130 lm/W |
| LED Source | Epistar SMD2835 |
| CCT | 3000K / 4000K / 6500K |
| CRI | ≥80 |
| Optics | 60° / 90° / 120° (PC reflector optional) |
| Housing | Die-cast Aluminum + PC |
| IP Rating | IP65 |
| Lifetime | 50,000 hours (L70) |
| Warranty | 5 years |
| Installation | Hook / ring mounting (others on request) |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
Consistent Visibility: ~130 lm/W efficacy with CRI 80 delivers crisp contrast for barcode reads and QC.
Thermal Stability: One-piece die-cast housing and open-air geometry maximize convective cooling to protect LEDs and drivers.
Ingress Protection: IP65-rated enclosure resists dust and low-pressure water jets, ideal for dusty docks and occasional wash-downs.
Modular Optics: Interchangeable 60°/90°/120° lenses or reflectors align light to racking height and aisle width, reducing over-lighting.
Low Maintenance: 50,000-hour L70 means fewer lifts, fewer stoppages, and predictable OPEX.
Straightforward Install: Hook ring standard; pendant/other hardware supported by request.
CCT Options: 3000K / 4000K / 6500K to match visual preference or legacy zones.
Assured Quality: Every unit passes high-pot and burn-in testing; 5-year warranty.
Task-ready luminance: The beam options let you tune vertical foot-candles on rack faces without over-lighting aisle centers.
Color that works: Neutral/cool whites (4000K/6500K) tighten edge contrast for scanning and visual inspection; 3000K is available for customer-facing or hospitality-adjacent zones.
Energy profile: At ~130 lm/W, sites typically see double-digit energy savings versus legacy HID with immediate reduction in heat load—HVAC runs easier in summer.
Glare management: Add the optional reflector to soften high-angle candela where high-bay meets people, like packing lines or recreation spaces.
Where it excels: Warehouses, workshops, gymnasiums, aviation hangars, convention venues, and big-box retail.
Design guidance: Share ceiling height, task planes, and aisle widths; we’ll advise optics and spacings to hit your foot-candle targets with margin while minimizing fixtures.
Manufacturing depth: Vertical integration for faster feedback loops—from LED binning to driver validation.
Proven QA: High-pot + burn-in on every unit; batch-level records for audits.
Lifecycle value: Lower maintenance, predictable availability, and direct engineering access keep your TCO in check.
Partnership mindset: We adapt optics, controls, and logistics to your operating model, not the other way around.
Q1: Are you a factory?
Yes—direct manufacturing with on-site QA and aging labs. Site visits and video audits are welcome.
Q2: Can I print my logo or request custom packaging?
Absolutely. We support laser-etched branding and private-label packaging with MOQs aligned to project scale.
Q3: How do you assure quality before shipment?
Each fixture undergoes high-pot safety testing and an extended burn-in. Batch reports are available with shipment.
Q4: What if I need dimming or sensors?
0–10V/1–10V dimming and motion/daylight sensors can be specified at order. We’ll align drivers and accessories to your control architecture.
This UFO LED High Bay is built for the demands of modern warehousing and manufacturing—long hours, airborne dust, and shifting task zones. The die-cast aluminum body pulls heat away from the LEDs like a finned radiator, so output stays steady through a long shift. Under power, the fixture comes alive with a clean, high-contrast white that sharpens edges on racking and pallets. Choose from tight 60° beams that punch down to the floor or wide 120° distribution that washes aisles evenly. The surface feels solid and cool to the touch after operation; no hot-spot surprise when your maintenance crew handles it. The integrated hook mounting makes first installs and retrofits fast—no drama at height. Pair it with optional reflectors to soften glare in people-dense zones such as packing lines or gyms. For operations teams, that translates to fewer shadows, clearer sight lines, and fewer mis-picks.
| Item | Spec |
|---|---|
| Model | BS-UFO-2 (100W / 150W / 200W / 250W) |
| Input Voltage | AC85–265V, 50/60 Hz |
| Power Factor | ≥0.90 |
| Efficacy | ≈130 lm/W |
| LED Source | Epistar SMD2835 |
| CCT | 3000K / 4000K / 6500K |
| CRI | ≥80 |
| Optics | 60° / 90° / 120° (PC reflector optional) |
| Housing | Die-cast Aluminum + PC |
| IP Rating | IP65 |
| Lifetime | 50,000 hours (L70) |
| Warranty | 5 years |
| Installation | Hook / ring mounting (others on request) |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
Consistent Visibility: ~130 lm/W efficacy with CRI 80 delivers crisp contrast for barcode reads and QC.
Thermal Stability: One-piece die-cast housing and open-air geometry maximize convective cooling to protect LEDs and drivers.
Ingress Protection: IP65-rated enclosure resists dust and low-pressure water jets, ideal for dusty docks and occasional wash-downs.
Modular Optics: Interchangeable 60°/90°/120° lenses or reflectors align light to racking height and aisle width, reducing over-lighting.
Low Maintenance: 50,000-hour L70 means fewer lifts, fewer stoppages, and predictable OPEX.
Straightforward Install: Hook ring standard; pendant/other hardware supported by request.
CCT Options: 3000K / 4000K / 6500K to match visual preference or legacy zones.
Assured Quality: Every unit passes high-pot and burn-in testing; 5-year warranty.
Task-ready luminance: The beam options let you tune vertical foot-candles on rack faces without over-lighting aisle centers.
Color that works: Neutral/cool whites (4000K/6500K) tighten edge contrast for scanning and visual inspection; 3000K is available for customer-facing or hospitality-adjacent zones.
Energy profile: At ~130 lm/W, sites typically see double-digit energy savings versus legacy HID with immediate reduction in heat load—HVAC runs easier in summer.
Glare management: Add the optional reflector to soften high-angle candela where high-bay meets people, like packing lines or recreation spaces.
Where it excels: Warehouses, workshops, gymnasiums, aviation hangars, convention venues, and big-box retail.
Design guidance: Share ceiling height, task planes, and aisle widths; we’ll advise optics and spacings to hit your foot-candle targets with margin while minimizing fixtures.
Manufacturing depth: Vertical integration for faster feedback loops—from LED binning to driver validation.
Proven QA: High-pot + burn-in on every unit; batch-level records for audits.
Lifecycle value: Lower maintenance, predictable availability, and direct engineering access keep your TCO in check.
Partnership mindset: We adapt optics, controls, and logistics to your operating model, not the other way around.
Q1: Are you a factory?
Yes—direct manufacturing with on-site QA and aging labs. Site visits and video audits are welcome.
Q2: Can I print my logo or request custom packaging?
Absolutely. We support laser-etched branding and private-label packaging with MOQs aligned to project scale.
Q3: How do you assure quality before shipment?
Each fixture undergoes high-pot safety testing and an extended burn-in. Batch reports are available with shipment.
Q4: What if I need dimming or sensors?
0–10V/1–10V dimming and motion/daylight sensors can be specified at order. We’ll align drivers and accessories to your control architecture.
English