 |
Model: BS-PL1 | IP: IP68 | Voltage: 12V (header) / 24V (spec line)*
Power Options: 15W / 18W / 24W / 36W | LED: SMD2835 | Efficacy: 110 lm/W
Material: ABS + PC | Colors: 3000K / 4000K / 6500K / RGB
Certifications: CE, C-tick, EMC, LVD, RoHS, SAA, SASO | Warranty: 5 years
| Quantity: | |
|---|---|
BS-PL1
Bestshow
Engineered for real-world pool environments, the BS-PL1 turns calm water into a living surface—clean white for training laps, rich RGB for weekend parties, and glare-controlled brightness that respects the eyes at night. The sealed ABS+PC body feels solid in hand and stays cool in operation; resin-filled competitors are common in this category, but our approach balances rigidity, weight, and cost to deliver an IP68 build you can specify with confidence. Installers will appreciate the straightforward low-voltage design and the consistent 110 lm/W efficacy that makes layout calculations painless. Whether your project is a villa pool, a hotel fountain pond, or an aquarium feature, the BS-PL1 adds color, contrast, and clarity—without adding maintenance drama.
| Item | Value |
|---|---|
| Product Name | AC12V IP68 RGB Led Submersible Underwater Pond Swimming Pool Light |
| Model | BS-PL1 |
| Power Options | 15W / 18W / 24W / 36W |
| LED Source | SMD2835 |
| Luminous Efficacy | 110 lm/W |
| CCT / Colors | 3000K / 4000K / 6500K / RGB |
| Input Voltage | 12V (header) / 24V (spec table) (to be confirmed at order) |
| IP Rating | IP68 |
| Material | ABS + PC |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
| Warranty | 5 years |
| Brand / Service | Bestshow / OEM & ODM |
| Application | Swimming pools, fountain ponds, aquariums, water parks |
Reliable IP68 envelope: the housing and gasket architecture resist ingress under sustained submersion, keeping electronics dry and stable over lifecycle.
Low-voltage peace of mind: 12V/24V (page discrepancy preserved) supports safe installs around water and simplifies transformer planning for multi-fixture runs.
High usable brightness: 110 lm/W typical efficacy translates to fewer fixtures per square meter, lower BOM, and lower transformer capacity.
Color that reads true: 3000K/4000K/6500K whites for task clarity, plus saturated RGB for ambience—no muddy tones, no flicker distraction.
Installer-friendly form factor: a slim, smooth face resists algae buildup and wipes clean; cabling exits are planned to reduce snags during pull.
OEM/ODM ready: branding, packaging, and selective parameter tuning available for private-label programs.
Assurance that scales: 5-year warranty aligns with commercial refresh cycles and supports long-term TCO models.
Use-case breadth: pools, ponds, aquaria, water parks—one family, multiple outcomes for spec unification across portfolios.
Operate on 12V (or 24V per spec line). For multi-fixture circuits, size the transformer with ≥20% headroom and keep voltage drop in check with adequate gauge and run lengths. In commercial pools, low voltage helps simplify compliance and field service.
IP68 construction is table-stakes in this category; ABS+PC offers a lighter, corrosion-neutral alternative to stainless for chlorinated and mildly saline water. Ensure gland sealing and cable routing respect bend radius to protect against capillary ingress over time.
Across pools and ponds, 110 lm/W means predictable photometric planning. Neutral to cool whites aid visibility; RGB enables scene setting. If your project includes waterfalls or jets, pair with narrower-beam accent lights for punch and sparkle.
Most sites deploy simple on/off or handheld remotes; advanced sites add Wi-Fi app control or DMX for synchronized shows. Plan control topology early (driver location, wiring paths, grouping) to avoid change-orders late in construction.
Surface/wall mounting dominates retrofit projects; low-profile faces reduce drag and biofilm. Confirm niche sizes and existing conduits in legacy pools; for new builds, standardize mounting height relative to waterline for visual uniformity.
Carry forward CE/RoHS/EMC declarations in project submittals. A 5-year warranty aligns with property maintenance cycles; retain serials and as-built wiring for future RMA clarity.
We write for specifiers, but we live with installers. That means fewer surprises on site, clear parameter sheets, and responsive pre-sale engineering when you need a custom look or specific lumen target. The BS-PL1 balances brightness, color quality, and safety in a value-driven ABS+PC form—ideal for multi-property rollouts where consistency and total cost matter. With OEM/ODM support, we can align private-label packaging and documentation to your brand, and our 5-year warranty underpins lifecycle planning for hospitality, municipal, and recreational clients. In short: predictable performance, straightforward integration, and support that scales with your portfolio.
Q1. 12V vs 24V—how should I choose?
The page shows both; many pools run AC12V for safety and legacy transformer ecosystems. If your site already has 12V infrastructure, stay with it; otherwise, specify the target voltage during PO so driver/transformer and control accessories match without field rework.
Q2. How many fixtures do I need?
Start from target illuminance and pool geometry, then apply 110 lm/W to estimate fixture counts. For uniformity, distribute luminaires along long walls and avoid glare near steps. Provide a simple CAD or dimensions and we’ll revert with a fast layout suggestion.
Q3. Can I integrate with Wi-Fi or DMX?
Yes—most projects use basic on/off or remote. For synchronized color scenes, we can align drivers and controllers with your chosen protocol. Plan power and control cable separation early to mitigate signal noise.
Q4. What about maintenance?
Keep lenses clean with non-abrasive wipes; check cable glands at seasonal shutdowns. Avoid operating fixtures out of water for extended periods to protect thermal performance.
Q5. Do you support OEM/ODM?
Yes—branding, carton, and documentation are customizable. For large rollouts, we can tune CCT bins, cable lengths, or default color programs to meet chain-wide standards.
Engineered for real-world pool environments, the BS-PL1 turns calm water into a living surface—clean white for training laps, rich RGB for weekend parties, and glare-controlled brightness that respects the eyes at night. The sealed ABS+PC body feels solid in hand and stays cool in operation; resin-filled competitors are common in this category, but our approach balances rigidity, weight, and cost to deliver an IP68 build you can specify with confidence. Installers will appreciate the straightforward low-voltage design and the consistent 110 lm/W efficacy that makes layout calculations painless. Whether your project is a villa pool, a hotel fountain pond, or an aquarium feature, the BS-PL1 adds color, contrast, and clarity—without adding maintenance drama.
| Item | Value |
|---|---|
| Product Name | AC12V IP68 RGB Led Submersible Underwater Pond Swimming Pool Light |
| Model | BS-PL1 |
| Power Options | 15W / 18W / 24W / 36W |
| LED Source | SMD2835 |
| Luminous Efficacy | 110 lm/W |
| CCT / Colors | 3000K / 4000K / 6500K / RGB |
| Input Voltage | 12V (header) / 24V (spec table) (to be confirmed at order) |
| IP Rating | IP68 |
| Material | ABS + PC |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
| Warranty | 5 years |
| Brand / Service | Bestshow / OEM & ODM |
| Application | Swimming pools, fountain ponds, aquariums, water parks |
Reliable IP68 envelope: the housing and gasket architecture resist ingress under sustained submersion, keeping electronics dry and stable over lifecycle.
Low-voltage peace of mind: 12V/24V (page discrepancy preserved) supports safe installs around water and simplifies transformer planning for multi-fixture runs.
High usable brightness: 110 lm/W typical efficacy translates to fewer fixtures per square meter, lower BOM, and lower transformer capacity.
Color that reads true: 3000K/4000K/6500K whites for task clarity, plus saturated RGB for ambience—no muddy tones, no flicker distraction.
Installer-friendly form factor: a slim, smooth face resists algae buildup and wipes clean; cabling exits are planned to reduce snags during pull.
OEM/ODM ready: branding, packaging, and selective parameter tuning available for private-label programs.
Assurance that scales: 5-year warranty aligns with commercial refresh cycles and supports long-term TCO models.
Use-case breadth: pools, ponds, aquaria, water parks—one family, multiple outcomes for spec unification across portfolios.
Operate on 12V (or 24V per spec line). For multi-fixture circuits, size the transformer with ≥20% headroom and keep voltage drop in check with adequate gauge and run lengths. In commercial pools, low voltage helps simplify compliance and field service.
IP68 construction is table-stakes in this category; ABS+PC offers a lighter, corrosion-neutral alternative to stainless for chlorinated and mildly saline water. Ensure gland sealing and cable routing respect bend radius to protect against capillary ingress over time.
Across pools and ponds, 110 lm/W means predictable photometric planning. Neutral to cool whites aid visibility; RGB enables scene setting. If your project includes waterfalls or jets, pair with narrower-beam accent lights for punch and sparkle.
Most sites deploy simple on/off or handheld remotes; advanced sites add Wi-Fi app control or DMX for synchronized shows. Plan control topology early (driver location, wiring paths, grouping) to avoid change-orders late in construction.
Surface/wall mounting dominates retrofit projects; low-profile faces reduce drag and biofilm. Confirm niche sizes and existing conduits in legacy pools; for new builds, standardize mounting height relative to waterline for visual uniformity.
Carry forward CE/RoHS/EMC declarations in project submittals. A 5-year warranty aligns with property maintenance cycles; retain serials and as-built wiring for future RMA clarity.
We write for specifiers, but we live with installers. That means fewer surprises on site, clear parameter sheets, and responsive pre-sale engineering when you need a custom look or specific lumen target. The BS-PL1 balances brightness, color quality, and safety in a value-driven ABS+PC form—ideal for multi-property rollouts where consistency and total cost matter. With OEM/ODM support, we can align private-label packaging and documentation to your brand, and our 5-year warranty underpins lifecycle planning for hospitality, municipal, and recreational clients. In short: predictable performance, straightforward integration, and support that scales with your portfolio.
Q1. 12V vs 24V—how should I choose?
The page shows both; many pools run AC12V for safety and legacy transformer ecosystems. If your site already has 12V infrastructure, stay with it; otherwise, specify the target voltage during PO so driver/transformer and control accessories match without field rework.
Q2. How many fixtures do I need?
Start from target illuminance and pool geometry, then apply 110 lm/W to estimate fixture counts. For uniformity, distribute luminaires along long walls and avoid glare near steps. Provide a simple CAD or dimensions and we’ll revert with a fast layout suggestion.
Q3. Can I integrate with Wi-Fi or DMX?
Yes—most projects use basic on/off or remote. For synchronized color scenes, we can align drivers and controllers with your chosen protocol. Plan power and control cable separation early to mitigate signal noise.
Q4. What about maintenance?
Keep lenses clean with non-abrasive wipes; check cable glands at seasonal shutdowns. Avoid operating fixtures out of water for extended periods to protect thermal performance.
Q5. Do you support OEM/ODM?
Yes—branding, carton, and documentation are customizable. For large rollouts, we can tune CCT bins, cable lengths, or default color programs to meet chain-wide standards.
English