 |
Outdoor-ready LED floodlight with adjustable bracket for precise aiming.
Power ladder: 30W/50W/100W/150W/200W/300W/400W to match poles, heights, and lux targets.
High efficacy (100–120 lm/W) to reduce wattage for the same illuminance, lowering OPEX.
Wide-range driver (AC85–265V, PF≈0.9) for global deployments and stable grid performance.
CCT options: 3000K / 4000K / 6500K to match ambience from warm façade wash to daylight security.
Aluminum housing engineered for thermal stability and long service life.
| Quantity: | |
|---|---|
BS-FL001
Bestshow
This aluminum SMD LED floodlight turns large, uneven outdoor areas into clean, confident spaces. The beam starts instantly—no hum, no warm-up—spilling an even, glass-clear wash that makes edges sharper and colors more legible after dark. The housing is a dense, cool-to-the-touch aluminum shell that sheds heat quietly; the tempered front keeps dust, mist, and rain out so the light stays bright through seasons of weather. Choose from warm 3000K for architectural texture, neutral 4000K for pathways and parks, or crisp 6500K where security visibility matters. Under the hood, a high-power-factor driver rides out voltage swing, keeping output steady while trimming losses on long runs. The result is fewer fixtures to hit your lux spec, fewer lifts for relamping, and fewer calls from site teams—exactly what multi-site facility managers want.
| Attribute | Spec |
|---|---|
| Model / Brand | BS-FL001 / Bestshow |
| Power Options | 30W / 50W / 100W / 150W / 200W / 300W / 400W |
| Luminous Efficacy | 100–120 lm/W (headline notes 120 lm/W) |
| LED Source | SMD |
| Input Voltage / PF | AC85–265V / PF≈0.9 |
| CCT Options | 3000K / 4000K / 6500K |
| Material | Aluminum |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
| Warranty | 3–5 years |
| Category | LED Floodlight |
Energy-to-lux efficiency: 100–120 lm/W helps you hit target illuminance with lower input watts, shrinking electrical load and generator sizing.
Robust, weather-facing build: Aluminum body resists corrosion; sealed optical cavity protects SMD LEDs from dust and spray in typical IP65 outdoor use cases.
Stable electrical behavior: AC85–265V input with PF≈0.9 reduces line losses and supports long cable runs in campus and industrial yards.
Visual comfort choices: 3000K/4000K/6500K let you tune mood and contrast—warm tones flatter facades; cool tones maximize object recognition.
Scalable wattage ladder: 30W–400W covers perimeters, loading docks, car parks, and small court lighting without re-engineering the spec each time.
Perimeters & security — higher CCT (6500K) enhances contrast for CCTV and patrols; aim beams to clamp down on shadows along fence lines.
Warehouses & yards — mid-CCT (4000K) keeps color rendering balanced for loading accuracy; bracket mount simplifies relays around bay doors.
Architecture & landscape — 3000K reveals stone and wood texture without glare; tight tilt control avoids spill into windows and roadways.
Public spaces (parks, courts, walkways) — mix wattages to tier illuminance by zone, cutting waste where traffic is lighter.
Competitor pages reinforce the above scenarios (parks, squares, factories, stadium-adjacent areas), confirming fit across common outdoor briefs.
Consistent output: SMD architecture paired with a stable, wide-input driver reduces flicker and safeguards visual comfort on cameras and human vision.
PF≈0.9 advantage: High power factor lowers reactive power, improving circuit capacity utilization—useful on long feeders typical of campuses and ports.
CCT strategy: 3000K softens façades; 4000K balances comfort and acuity; 6500K maximizes object detection—select per zone to balance safety and ambience.
Life & maintenance: Competitor benchmarks show 50,000h designs are standard; pairing our efficacy with this lifecycle reduces lift rentals and truck rolls over multi-year terms.
Thermal path: Solid aluminum housing acts as a heat-spreading spine; cool operation supports lumen maintenance over time.
Ingress protection context: IP65 is widely used for outdoor flood applications in peers; sealed optics and gaskets limit dust and rain intrusion in typical sites.
Finish & optics: Smooth tempered front and powder-coated shell resist staining and are easy to wipe down in dusty yards and seaside air.
Real-world toughness: Bracket mount tolerates vibration on poles and building envelopes, maintaining aim after storms and routine pressure washing.
Bracketed mounting: Quick set-and-lock tilt for aiming; one person can hang and fine-tune with a socket wrench.
Retrofit-friendly power: AC85–265V accepts legacy 110/220/240V grids; PF≈0.9 keeps feeders efficient.
Common add-ons (on request): photocell interfaces, shield/visor for spill-light control, junction boxes, and safety lanyards.
Commissioning tips: start with lower CCT near residences; step up wattage or tilt only where cameras need longer reach.
CE, EMC, RoHS, LVD confirm electrical safety and EMC conformity for EU-bound projects; SAA aligns with Australia/NZ; SASO supports Saudi standards.
Documentation pack: datasheet, wiring guidance, and certification copies available for submittals; competitor pages consistently surface these artifacts in B2B flows.
3–5-year warranty aligned with category norms; guided troubleshooting and replacement support reduce site downtime.
Quality gates: aging tests and batch inspections help ensure early-life stability; policies are structured for fast RMA where needed.
Branding: laser/print logo and retail-ready packaging on MOQ.
Performance tuning: target CCT per application; discuss drivers, surge protection levels, beam shaping, and cable lengths to standardize across rollouts.
Portfolio mapping: harmonize with other site luminaires (street, high bay, wall) for cohesive look and simplified spares.
Neutral or custom boxes with protective inserts and palletized shipments; carton marks support fast ASN matching at DCs.
Sampling & scaling: sample orders supported, then ramp to bulk with stable lead times; peer listings often show tiered pricing and monthly capacity data to plan procurement.
Energy-driven TCO: high efficacy + robust PF cuts operating and infrastructure costs.
Specification confidence: multi-region certifications simplify compliance in cross-border projects.
Operational reliability: aluminum thermal design, sealed optics, and stable drivers sustain lumen output in outdoor duty cycles.
B2B fluency: OEM/ODM, low-friction sampling, and structured warranty support make multi-site rollouts predictable.
Q1. What voltage can this accept across sites?
AC85–265V with PF≈0.9, suitable for 110/220/240V grids and long cable runs.
Q2. Which CCT should we choose?
3000K for warm façades, 4000K for mixed-use walkways, 6500K for security and CCTV acuity.
Q3. How does this compare to peers on durability?
It matches category norms for IP65-class outdoor use with die-cast/formed aluminum and sealed optics seen across the segment.
Q4. What’s the typical service life?
50,000h is common in competitor disclosures; with proper thermal management and surge protection, long-term lumen maintenance is achievable.
Q5. Can we add surge protection or photocells?
Yes—discuss SPD levels and control interfaces during OEM setup to align with local grid quality and light-trespass policies.
This aluminum SMD LED floodlight turns large, uneven outdoor areas into clean, confident spaces. The beam starts instantly—no hum, no warm-up—spilling an even, glass-clear wash that makes edges sharper and colors more legible after dark. The housing is a dense, cool-to-the-touch aluminum shell that sheds heat quietly; the tempered front keeps dust, mist, and rain out so the light stays bright through seasons of weather. Choose from warm 3000K for architectural texture, neutral 4000K for pathways and parks, or crisp 6500K where security visibility matters. Under the hood, a high-power-factor driver rides out voltage swing, keeping output steady while trimming losses on long runs. The result is fewer fixtures to hit your lux spec, fewer lifts for relamping, and fewer calls from site teams—exactly what multi-site facility managers want.
| Attribute | Spec |
|---|---|
| Model / Brand | BS-FL001 / Bestshow |
| Power Options | 30W / 50W / 100W / 150W / 200W / 300W / 400W |
| Luminous Efficacy | 100–120 lm/W (headline notes 120 lm/W) |
| LED Source | SMD |
| Input Voltage / PF | AC85–265V / PF≈0.9 |
| CCT Options | 3000K / 4000K / 6500K |
| Material | Aluminum |
| Certifications | CE, C-tick, EMC, LVD, RoHS, SAA, SASO |
| Warranty | 3–5 years |
| Category | LED Floodlight |
Energy-to-lux efficiency: 100–120 lm/W helps you hit target illuminance with lower input watts, shrinking electrical load and generator sizing.
Robust, weather-facing build: Aluminum body resists corrosion; sealed optical cavity protects SMD LEDs from dust and spray in typical IP65 outdoor use cases.
Stable electrical behavior: AC85–265V input with PF≈0.9 reduces line losses and supports long cable runs in campus and industrial yards.
Visual comfort choices: 3000K/4000K/6500K let you tune mood and contrast—warm tones flatter facades; cool tones maximize object recognition.
Scalable wattage ladder: 30W–400W covers perimeters, loading docks, car parks, and small court lighting without re-engineering the spec each time.
Perimeters & security — higher CCT (6500K) enhances contrast for CCTV and patrols; aim beams to clamp down on shadows along fence lines.
Warehouses & yards — mid-CCT (4000K) keeps color rendering balanced for loading accuracy; bracket mount simplifies relays around bay doors.
Architecture & landscape — 3000K reveals stone and wood texture without glare; tight tilt control avoids spill into windows and roadways.
Public spaces (parks, courts, walkways) — mix wattages to tier illuminance by zone, cutting waste where traffic is lighter.
Competitor pages reinforce the above scenarios (parks, squares, factories, stadium-adjacent areas), confirming fit across common outdoor briefs.
Consistent output: SMD architecture paired with a stable, wide-input driver reduces flicker and safeguards visual comfort on cameras and human vision.
PF≈0.9 advantage: High power factor lowers reactive power, improving circuit capacity utilization—useful on long feeders typical of campuses and ports.
CCT strategy: 3000K softens façades; 4000K balances comfort and acuity; 6500K maximizes object detection—select per zone to balance safety and ambience.
Life & maintenance: Competitor benchmarks show 50,000h designs are standard; pairing our efficacy with this lifecycle reduces lift rentals and truck rolls over multi-year terms.
Thermal path: Solid aluminum housing acts as a heat-spreading spine; cool operation supports lumen maintenance over time.
Ingress protection context: IP65 is widely used for outdoor flood applications in peers; sealed optics and gaskets limit dust and rain intrusion in typical sites.
Finish & optics: Smooth tempered front and powder-coated shell resist staining and are easy to wipe down in dusty yards and seaside air.
Real-world toughness: Bracket mount tolerates vibration on poles and building envelopes, maintaining aim after storms and routine pressure washing.
Bracketed mounting: Quick set-and-lock tilt for aiming; one person can hang and fine-tune with a socket wrench.
Retrofit-friendly power: AC85–265V accepts legacy 110/220/240V grids; PF≈0.9 keeps feeders efficient.
Common add-ons (on request): photocell interfaces, shield/visor for spill-light control, junction boxes, and safety lanyards.
Commissioning tips: start with lower CCT near residences; step up wattage or tilt only where cameras need longer reach.
CE, EMC, RoHS, LVD confirm electrical safety and EMC conformity for EU-bound projects; SAA aligns with Australia/NZ; SASO supports Saudi standards.
Documentation pack: datasheet, wiring guidance, and certification copies available for submittals; competitor pages consistently surface these artifacts in B2B flows.
3–5-year warranty aligned with category norms; guided troubleshooting and replacement support reduce site downtime.
Quality gates: aging tests and batch inspections help ensure early-life stability; policies are structured for fast RMA where needed.
Branding: laser/print logo and retail-ready packaging on MOQ.
Performance tuning: target CCT per application; discuss drivers, surge protection levels, beam shaping, and cable lengths to standardize across rollouts.
Portfolio mapping: harmonize with other site luminaires (street, high bay, wall) for cohesive look and simplified spares.
Neutral or custom boxes with protective inserts and palletized shipments; carton marks support fast ASN matching at DCs.
Sampling & scaling: sample orders supported, then ramp to bulk with stable lead times; peer listings often show tiered pricing and monthly capacity data to plan procurement.
Energy-driven TCO: high efficacy + robust PF cuts operating and infrastructure costs.
Specification confidence: multi-region certifications simplify compliance in cross-border projects.
Operational reliability: aluminum thermal design, sealed optics, and stable drivers sustain lumen output in outdoor duty cycles.
B2B fluency: OEM/ODM, low-friction sampling, and structured warranty support make multi-site rollouts predictable.
Q1. What voltage can this accept across sites?
AC85–265V with PF≈0.9, suitable for 110/220/240V grids and long cable runs.
Q2. Which CCT should we choose?
3000K for warm façades, 4000K for mixed-use walkways, 6500K for security and CCTV acuity.
Q3. How does this compare to peers on durability?
It matches category norms for IP65-class outdoor use with die-cast/formed aluminum and sealed optics seen across the segment.
Q4. What’s the typical service life?
50,000h is common in competitor disclosures; with proper thermal management and surge protection, long-term lumen maintenance is achievable.
Q5. Can we add surge protection or photocells?
Yes—discuss SPD levels and control interfaces during OEM setup to align with local grid quality and light-trespass policies.
English